77
Getting started
Parking and locking
You have now completed your first drive.
You have properly stopped and parked
your vehicle. End your drive as follows.
1 Release handle
2 Parking brake pedal
Parking and locking
Warning! G
With the engine not running, there is no
power assistance for the brake and steer-
ing systems. In this case, it is important to
keep in mind that a considerably higher
degree of effort is necessary to brake or
steer the vehicle.
Warning! G
Do not park this vehicle in areas where
combustible materials such as grass, hay or
leaves can come into contact with the hot
exhaust system, as these materials could be
ignited and cause a vehicle fire.
To reduce the risk of personal injury, or
damage to the vehicle drivetrain, as a re-
sult of vehicle movement, before turning
off the engine and leaving the vehicle al-
ways:
앫 Keep right foot firmly on brake pedal.
앫 Firmly depress parking brake pedal.
앫 Move the gear selector lever to
position P.
앫 Slowly release brake pedal.
앫 When parked on an incline, turn front
wheels towards the road curb.
앫 Turn the SmartKey or the SmartKey
with KEYLESS-GO** to starter switch
position 0 and remove, or press
KEYLESS-GO** start/stop button
(컄 page 61).
앫 Take the SmartKey or the SmartKey
with KEYLESS-GO** with you and lock
vehicle when leaving.
Parking brake
Warning! G
Engaging the parking brake while the ve-
hicle is in motion can cause the rear wheels
to lock up. You could lose control of the
vehicle and cause an accident. In addition,
the vehicle’s brake lights do not light up
when the parking brake is engaged. Make
sure not to endanger any other road users
when you engage the parking brake.
컄컄
To Next Page
Loading...
