121
Controls in detail
Locking and unlocking
Restoring to factory setting
왘 Press and hold buttons Œ and ‹
simultaneously for about 5 seconds
until battery check lamp 6
(
컄 page 117) flashes twice.
Global locking using KEYLESS-GO lock
button on the trunk lid
1 KEYLESS-GO lock button on trunk lid
왘 Press lock button 1.
With the trunk and all doors closed,
all turn signal lamps flash three times.
The locking knobs in the doors move
down. The anti-theft alarm system is
armed.
i You can also lock the vehicle using the
lock button on an outside door handle
(컄 page 80) or KEYLESS-GO locking/closing
switch (컄 page 126).
왘
Press button Œ or ‹.
Battery check lamp 6 (컄 page 117)
comes on briefly to indicate that the
SmartKey or SmartKey with
KEYLESS-GO batteries are in order.
! If battery check lamp 6 does not come on
briefly during check, then the SmartKey or
SmartKey with KEYLESS-GO batteries are dis-
charged.
Replace the batteries (컄 page 405).
You can obtain the required batteries at any
authorized Maybach Studio.
i If the batteries are checked within signal
range of the vehicle, pressing button Πor
‹ will lock or unlock the vehicle according-
ly.
If you lose a SmartKey, SmartKey with
KEYLESS-GO or mechanical key, you
should do the following:
왘 Have the SmartKey or SmartKey with
KEYLESS-GO deactivated by an au-
thorized Maybach Studio.
왘 Report the loss of the SmartKey,
SmartKey with KEYLESS-GO or the
mechanical key immediately to your
car insurance company.
왘 If necessary, have the mechanical lock
replaced.
Your authorized Maybach Studio will be
glad to supply you with a replacement.
Checking batteries in the SmartKey or
SmartKey with KEYLESS-GO**
Loss of the SmartKey or SmartKey
with KEYLESS-GO**
To Next Page
Loading...
