70
Getting started
Driving
앫 Do not fasten a seat belt around a
person and another object at the
same time. When using a seat belt to
secure infant restraint or toddler re-
straint or children in booster seats,
always follow the child seat manufac-
turer’s instructions.
앫 Check your seat belt during travel to
make sure it is properly positioned.
앫 Make sure the seat belt is always fit-
ted snugly. Take special care of this
when wearing loose clothing.
Automatic transmission
Gearshift pattern for automatic transmission
P Park position with gear selector lever
lock
R Reverse gear
N Neutral
D Drive position
For more information, see “Automatic
transmission” (
컄 page 178).
Warning! G
Do not pass seat belts over sharp edges.
They could tear.
Do not allow the seat belt to get caught in
the door or in the seat adjustment mecha-
nism. This could damage the seat belt.
Never attempt to make modifications to
seat belts. This could impair the effective-
ness of the seat belts.
Do not bleach or dye seat belts as this may
severely weaken them. In a crash they may
not be able to provide adequate protec-
tion.
Damaged seat belts or seat belts that were
highly stressed in an accident must be re-
placed. Contact an authorized Maybach
Studio.
컄컄
Starting the engine
Warning! G
Inhalation of exhaust gas is hazardous to
your health. All exhaust gas contains car-
bon monoxide (CO), and inhaling it can
cause unconsciousness and possible death.
Do not run the engine in confined areas
(such as a garage) which are not properly
ventilated. If you think that exhaust gas
fumes are entering the vehicle while driv-
ing, have the cause determined and cor-
rected immediately. If you must drive
under these conditions, drive with at least
one window fully open.
To Next Page
Loading...
