293
Controls in detail
Useful features
앫 While performing step 3, hold hand-
held remote control 5 at different
lengths and angles from the signal
transmitter button (2, 3 or 4) you
are programming. Attempt varying
angles at the distance of 2 to 5 in
(5 to 12 cm) away or the same angle
at varying distances.
앫 If another hand-held remote control
is available for the same device, try
the programming steps again using
that other hand-held remote control.
Make sure new batteries are in the
hand-held remote control before be-
ginning the procedure.
앫 Straighten the antenna wire from the
garage door opener assembly. This
may help improve transmitting and/
or receiving signals.
1 5.1 in (13 cm)
2 26 in (66 cm)
3 Infrared transparent area
(pass-through for electronic signals)
Your vehicle is equipped with infrared
reflecting glass which reduces the
amount of radiated heat entering the in-
terior through the windows.
The infrared reflecting glass also pre-
vents the transmission of signals through
the glass by in-vehicle electronic devices
(e.g. electronic toll collection devices).
To allow the use of these devices in the
vehicle, one infrared transparent area 3
is placed in the windshield.
Infrared reflecting windshield
To Next Page
Loading...
