168
Controls in detail
Control system
Fuel consumption statistics since start
왘 Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
왘 Press button j or k repeatedly
until the message
FROM START
ap-
pears in the multifunction display.
i Each time you call up the trip computer,
the last function used appears as the first dis-
play.
1 Distance driven since start
2 Time elapsed since start
3 Average fuel consumption since start
4 Average speed since start
Incorporating statistics from the previ-
ous journey in the consumption statis-
tics
When you restart the engine, the
FROM START
display flashes for:
앫 a distance of approximately
1.25 miles (2 kilometers)
or
앫 a duration of 2 minutes
During this period, the data from the
previous journey can be incorporated as
follows:
왘 Press reset button J (컄 page 154) in
the instrument cluster.
The statistics will be incorporated.
i If you do not press reset button J, the
consumption statistics will be reset to
0
.
Fuel consumption since last reset
왘 Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
왘 Press button j or k repeatedly
until the message
SINCE RESET
ap-
pears in the multifunction display.
1 Distance driven since last reset
2 Time elapsed since last reset
3 Average fuel consumption since last
reset
4 Average speed since last reset
Resetting fuel consumption statistics
왘 Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
왘 Press button j or k repeatedly
until you see the reading that you
want to reset in the multifunction
display.
왘 Press and hold reset button J
(
컄 page 154) in the instrument clus-
ter until the value is reset to
0
.
Distance to empty
왘 Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
왘 Press button j or k repeatedly
until the message
RANGE
appears in
the multifunction display.
The calculated remaining driving
range based on the current fuel tank
level appears in the multifunction dis-
play.