238
Controls in detail
Driving systems
Range of the sensors
To function properly, the sensors must be
free of dirt, ice, snow and slush. Clean
the sensors regularly, being careful not
to scratch or damage the sensors, see
“Cleaning the Parktronic system sensors”
(
컄 page 346).
Front sensors
Rear sensors
! During parking maneuvers, pay special at-
tention to objects located above or below the
height of the sensors (e.g. street curbs, paint-
ed posts, or trailer hitches etc.). The Parktronic
system will not detect such objects at close
range and damage to your vehicle or the ob-
ject may result.
Ultrasonic signals from outside sources (e.g.
truck air brakes, car wash, or jackhammers)
may impair the operation of the Parktronic
system.
Minimum distance
If the system detects an obstacle in this
range, all the warning lamps come on
and you hear a warning signal. If the ob-
stacle is closer than the minimum dis-
tance, the actual distance might no
longer be indicated by the system.
Warning indicators
Visual signals indicate to the driver the
relative distance between the sensors
and an obstacle. The warning indicator
for the front area is located above the
center air vents in the dashboard. The
warning indicator for the rear area is in-
tegrated in the rear roof lining
(
컄 pages 38-44).
Maybach 62 with partition*
You have an additional warning indica-
tor for the rear area in the roof lining, in
front of the partition.
In order for you to see this warning indi-
cator, the interior rear view mirror tilts
slightly upward if:
앫 the partition and curtain are not
completely open
앫 the gear selector lever is in position R
Center approx. 40 in (100 cm)
Corners approx. 24 in (60 cm)
Center approx. 48 in (120 cm)
Corners approx. 32 in (80 cm)
Center approx. 8 in (20 cm)
Corners approx. 6 in (15 cm)
To Next Page
Loading...
