CRIMP DATA ANALYZER
CDA10
REV.01
8. MAINTENANCE
8.1 GENERAL SAFETY PRECAUTIONS
Maintenance, troubleshooting and repair operations are only allowed to be performed by
authorised personnel.
Personnel in charge of machine operation and maintenance must be properly trained and have in-
depth knowledge of accident prevention regulations. Unauthorised personnel must remain
outside the work area during operations.
The accident prevention precautions contained in this paragraph must always be strictly observed
during machine operation and maintenance in order to avoid harm to personnel and equipment.
These precautions will be referred to and further detailed in the Manual each time a procedure
involving the risk of harm or injury will be required, by means of CAUTION and HAZARD notes:
Restore the existing protections, checking their correct functioning, at the end of each maintenance
operation.
Hazard notes precede an operation that can cause injury if not performed
correctly
.
Caution notes precede an operation that can cause damage to equipment if
not performed correctly
.
To Next Page
Loading...
Need help?
General