EasyManuals Logo

Mecal CDA10 User Manual

Mecal CDA10
119 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
CRIMP DATA ANALYZER
CDA10
REV.01
26
2.3 DISPOSAL OF EXHAUSTED MATERIALS
In its normal operation, the machine does not produce any kind of waste or exhausted material.
There are specific regulations for environmental protection in every country with relation to the
disposal of such materials.
The Customer must be aware of these regulations and operate in such a way as to comply with
them.
In particular, please see chapter 7 regarding the disposal of the materials that make up the
machine.
2.4 DANGER ZONES
The equipment has no danger zones. See the machine use and maintenance manual to
outline the danger zones of the press.
2.5 PERSONAL PROTECTIVE EQUIPMENT (PPE)
Persons working on the machine must use personal protective equipment such as to minimise
possible risks.
HAZARD
The clothing of those working or performing maintenance on the machine
must comply with the essential safety requirements defined by the European
community directives and by the laws in force in the country where the
machine is installed
.
HAZARD
During management and maintenance operations, personnel must wear
suitable work clothing so as to prevent accidents from occurring.
To avoid mechanical risks, such as dragging, trapping or other, pull back hair
and do not wear bracelets, watches, rings or necklaces
.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mecal CDA10 and is the answer not in the manual?

Mecal CDA10 Specifications

General IconGeneral
BrandMecal
ModelCDA10
CategoryMeasuring Instruments
LanguageEnglish