CRIMP DATA ANALYZER
CDA10
REV.01
8.3 SAFETY CONTROL PLAN
8.3.1 C FUNCTIONAL CHECKS AND TESTS ON SAFETY DEVICES
These operations must be carried out by competent personnel with specific knowledge on the use
of safety devices.
EMERGENCY BUTTONS
Where present, press each button on the machine and verify that it stops immediately.
SAFETY SWITCHES
Where present, check the correct functioning of the systems following the various openings of the
movable guards. Check their correct fixing.
ASSEMBLY FASTENERS
Check that nuts and bolts have not become deteriorated. In particular, check the adjustable handles
that support the bearing structures of the machine.
Electrically or mechanically bridging the circuit breakers on the safety circuits
or tampering with them in any way is strictly prohibited.
he efficiency of the safety systems on the machine.
This procedure must be repeated as part of normal maintenance practic
e.
Maintenance personnel must periodically check the functionality of safety
devices
.
To Next Page
Loading...
Need help?
General