CRIMP DATA ANALYZER
CDA10
REV.01
2.2.5 VIBRATIONS
The equipment does not produce vibrations that are dangerous for the health of personnel working.
2.2.6 NOISE
The equipment does not produce noise that are dangerous for the health of personnel working.
2.2.7 ELECTROMAGNETIC EMISSIONS
The machine contains electronic components subject to the Electromagnetic Compatibility
regulation, conditioned by conducted and radiated emissions.
The emission values comply with the standard thanks to the use of components complying with the
Electromagnetic Compatibility Directive, suitable connections and the installation of filters where
necessary.
The equipment is therefore compliant with the Electromagnetic Compatibility Directive.
Excessive vibrations can only be caused by a mechanical failure, which must
be immediately reported and eliminated
.
Measurements of worker noise exposure levels must be carried out by the
customer in accordance with the legislation in force in their own country
.
Any maintenance on electrical equipment ca
rried out in a non-
compliant
manner, or involving the incorrect replacement of components, may
compromise the efficiency of the equipment itself
.
To Next Page
Loading...
Need help?
General