CRIMP DATA ANALYZER
CDA10
REV.01
6.4.8 OPERATING PASSWORD SETTING
An operating password can be set to prevent changes to the control unit settings. The
password protection and the password to install the software update are disabled by default.
Follow these steps to set the password:
1. Click on "Network” on the sidebar of the main web page to enter the “CFA Settings” menu and
click on the “Operating Password” link.
2. Enter the password, select the type of protection you want to give and click on "Submit".
If the code is set to
"0000", the password
system will be disabled,
while the system will
operate if any other code
is set.
To Next Page
Loading...
Need help?
General