CRIMP DATA ANALYZER
CDA10
REV.01
2.6 RESIDUAL RISKS
2.6.1 GENERAL INFORMATION
All the areas and the parts at risk were evaluated during the design phase, and thus all the
precautions necessary to avoid risks to people and damage to machine components have been
taken.
2.6.2 RESIDUAL RISKS
After carefully considering all the possible risks related to the machine, all the solutions necessary
have been adopted to eliminate the risks and limit the dangers for exposed persons.
Periodically check the functionality of all safety devices
.
not remove the protections present.
Do not insert foreign objects and/or tools into the work area of the machine
.
It is necessary to periodically check the regular operation of the safety devices
as a precautionary measure for safety purposes.
Making any kind of modification is strictly prohibited, in order not to create
additional dangers and consequent unforeseen risks
.