CRIMP DATA ANALYZER
CDA10
REV.01
1. GENERAL INFORMATION
1.1 INTRODUCTION
This manual contains all the information necessary for correct installation, regular use and suitable
maintenance of the machine.
This document is the use and maintenance manual for the machine:
CRIMP DATA ANALYZER - CDA10
and has been compiled in compliance with Machinery Directive 2006/42/CE.
The Use and Maintenance manual is to be considered an integral part of the machine and must be
kept until its final disposal. It must be kept by the person in charge of the machine after final
installation.
1.2 SUPPORT
For technical support, contact:
MECAL S.r.l.
Registered and production office: Strada per Felizzano, 18 - 15043 Fubine (AL) - Italy
Tel. +39 (0)131 792792 - Fax (0)131 792733 / 792734 Fully paid share cap. € 500.000
Register of Alessandria Companies n. 11690 - CCIAA Alessandria - REA N. 153887 - N. IEC AL002563
Tax Code 01328270069 – ISO Code: IT – VAT n.01328270069
Mecal S.r.l., manufacturer of the equipment in question, will hereafter be
referred to as “Manufacturer”.
The company that purchased the equipment will hereinafter be referred to as
"Client".
The Manufacturer requires that personnel in charge of running and maintaining the machine,
as well as personnel in charge of transport and assembly operations, read this document.
To Next Page
Loading...
Need help?
General