CRIMP DATA ANALYZER
CDA10
REV.01
3.2 TECHNICAL FEATURES
The following table shows the main technical features of the machine.
GENERAL TECHNICAL FEATURES
Measuring range 0 – 20 kN
Resolution 10 Newtons
Repeatability 0,1 %
Sensor type Piezo-ceramic
Power supply (from the press) 9 – 24 Vdc
Evaluation time < 20 ms
Communication protocol TCPIP / HTTP / UDP
Dimensioni (unità di controllo) 85 x 103 x 35 mm
Protection degree IP40
Operating temperature da 0 a +70 °C
The features shown in the previous table may undergo variations; therefore,
please see the attached diagrams for greater precision or verification of the
machine features
.
To Next Page
Loading...