TABLE OF CONTENTS MA-5079-ENG MICRON GEAR ADHESIVE MELTER
4. MELTER OPERATION 4-1
General information 4-1
Filling the tank 4-2
Starting up the melter equipment 4-2
Melter equipment displays 4-3
Displaying the temperature for each component 4-4
Alarm displays 4-5
Hot-melt level display (optional) 4-7
Display and adjustment of the working speed 4-7
Temperature adjustment 4-8
Programming the applicator parameters 4-9
Programming process 4-9
Timer to switch between ON - Standby - OFF modes 4-13
Password to access parameter programming 4-14
Total equipment service hours counter 4-14
Counter that warns of the need to change the adhesive agent filter 4-15
Setting the clock 4-16
Programming the current day and hour 4-16
Programming equipment activation/deactivation 4-17
Disabling the equipment activation/deactivation program 4-18
Programming the equipment’s standby function activation/deactivation 4-18
Disabling the equipment standby function programming 4-19
Special function buttons 4-20
Pumping control 4-21
Starting up the pump control card 4-21
Pumping safety measures 4-21
Password security 4-22
LED indicators 4-23
To Next Page
Loading...
