FOCKE MELER GLUING SOLUTIONS TABLE OF CONTENTS
Modes of operation 4-24
Mode of operation with internal pumping control and internal speed control 4-24
Mode of operation with internal pumping control and external speed control 4-25
Mode of operation with external pumping control and internal speed control 4-26
Mode of operation with external pumping control and external speed control 4-27
User configuration menu 4-28
Displaying alarms and reset function 4-29
Maximum rpm alarm 4-29
Minimum rpm alarm 4-29
Variator alarm 4-29
Configuring speed ramp 4-30
Programming speed ramp 4-31
Current Vin voltage display 4-32
By-pass valve regulation 4-32
Manual valve control 4-32
Pneumatic valve control 4-32
Using the air drying system (optional) 4-33
Turning off the melter equipment 4-33
5. MAINTENANCE 5-1
Equipment cleaning 5-1
System depressurisation 5-3
Access to the interior of the equipment 5-3
Access to distributor 5-3
Access to pump gear- motor 5-3
Filter maintenance 5-4
Cleaning the tank 5-5
Changing adhesive type 5-5
Cleaning burnt adhesive 5-5
Emptying the tank 5-6
To Next Page
Loading...
