EasyManuals Logo

Mercury D4.2L D-Tronic Service Manual

Mercury D4.2L D-Tronic
878 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #150 background imageLoading...
Page #150 background image
SERVICE MANUAL NUMBER 22
STERNDRIVE (MCM) MODELS
Page 2A-4 90-860074--1 FEBRUARY 2002
Lubricants / Sealants / Adhesives
Description Part Number
Liquid Neoprene 92-25711--2
Perfect Seal 92-34227--1
Engine Coupler Spline Grease 91-816391A4
Battery Terminal Sealant Obtain Locally
Removal
CAUTION
It is good practice to ventilate the engine compartment prior to servicing any engine
components to remove any fuel vapors which may cause difficulty breathing or be
an irritant.
7. Disconnect battery cables from battery.
8. Disconnect battery cables from engine.
9. Remove engine cover.
IMPORTANT: Sterndrive unit must be removed prior to engine removal. Refer to
appropriate Mercury MerCruiser Sterndrive Service Manual.
10. Remove sterndrive unit.
11. Disconnect extension harness connector plug from engine harness connector.
12. Disconnect gear lube monitor wiring.
13. Remove engine mounted gear lube monitor.

Table of Contents

Other manuals for Mercury D4.2L D-Tronic

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury D4.2L D-Tronic and is the answer not in the manual?

Mercury D4.2L D-Tronic Specifications

General IconGeneral
BrandMercury
ModelD4.2L D-Tronic
CategoryEngine
LanguageEnglish

Related product manuals