TURBOCHARGER
SERVICE MANUAL NUMBER 22
90-860074--1 FEBRUARY 2002 Page 7C-7
Turbocharger And Related Components (continued)
15 - Turbocharger
16 - Gasket
17 - Stud (4 x M10x30 mm)
18 - Clamp
19 - Gasket
20 - Sterndrive (MCM) Exhaust Riser (If Equipped)
21 - Pipe Plug, 1/4 in. x 18
22 - Oil Drain Pipe
23 - Hollow Bolt with Sealing Washer
24 - Coolant Vent Pipe and Hose
25 - Fitting At Water Manifold
26 - Seawater Hose Fitting (Cast Into MCM Riser)
27 - Turbocharger-to-Intake Duct Hose
28 - Hose Clamps
29 - Oil Feed Pipe
30 - Gasket
31 - Spacer
32 - O-ring
33 - Connector
34 - Sealing Washer
35 - Turbocharger Support Bracket and Fasteners
36 - Plug
37 - Inboard (MIE) Exhaust Elbow (Design 1)
38 - Inboard (MIE) Exhaust Elbow (Design 2)
To Next Page
Loading...
