ENGINE MECHANICAL
SERVICE MANUAL NUMBER 22
90-860074--1 FEBRUARY 2002 Page 3A-87
Installation
1. Apply Loctite 242 to threads when replacing complete oil pressure relief valve assembly.
Screw the complete assembly into the crankcase.
70285
70298
a
b
a-Valve Assembly
b-Apply Sealant to Threads
2. Using a suitable tool, torque relief valve assembly to 53.9 Nm (39 lb-ft).
70298
a
b
c
Typical
a-Example Of Suitable Tool
b-Valve Assembly
c-Slots
3. Install oil pan and related hardware.
To Next Page
Loading...
