EDI DIAGNOSIS SERVICE MANUAL NUMBER 22
Page 5E-4 90-860074--1 FEBRUARY 2002
Special Tools
Tool Name Description Part Number
DMT 2000A
Tachometer / Multi-Meter Kit - High
Impedance Multimeter
91-854009A3
Special EDI Tools
Tool Name Description Part Number
EFI / EDI Scan
Tool
(Rinda
Technologies
1
)
Displays problem codes stored in the
ECM. It also allows monitoring of various
circuits and components in the fuel
injection system. Allows for test firing
injectors.
94050M (English)
94055M
(Multi-Language)
Quicksilver
Diagnostic Blink
Code Tool
Flashes light to display problem codes. 91-854221
1
: Rinda Technologies, 4563 N. Elston Ave., Chicago, IL 60630, Phone: 312-736-6633
Kent-Moore Tools
Kent-Moore Tools, Inc.
29784 Little Mack
Roseville, MI 48066
Phone: (313) 774-9500
Description Part Number
High Impedance
Multimeter (DVM)
1
Minimum 10 megohm
input impedance required
on all voltage ranges. As
ammeter, accurately
measures low value
current flow. As
ohmmeter, reads 0-200
ohms, 2/20/200 kΩ, 2/20
mΩ
J-34029-A or Equivalent
Unpowered Test Light
2
Used to check circuit
wiring, short to ground, or
voltage.
J-34142-B
1
The High Impedance Multimeter that comes with the existing Outboard EFI Tester (91-11001A1) meets
the requirements listed above.
2
Using a test light with 100 mA or less rating may show a faint glow when test actually states no light.
To Next Page
Loading...
