ENGINE MECHANICAL
SERVICE MANUAL NUMBER 22
90-860074--1 FEBRUARY 2002 Page 3A-133
2. Install standard size thrust washers into flywheel side of carrier as shown. (Use
Quicksilver Needle Bearing Lubricant to help keep washers positioned.)
70407
a
a-Thrust Washers (Standard Size), Flywheel Side
3. Install standard size thrust washers into front (crankshaft) side of carrier. (Use
Quicksilver Needle Bearing Lubricant to help keep washers positioned.)
70408
a
a-Thrust washers (Standard Size), Front (Crankshaft) Side
4. Install new O-ring into groove around carrier. Coat with clean engine oil to assist during
installation.
70408
a
a-O-ring
To Next Page
Loading...
