ENGINE MECHANICAL
SERVICE MANUAL NUMBER 22
90-860074--1 FEBRUARY 2002 Page 3A-147
INBOARD (MIE) MODELS (CONTINUED)
1-Screw
2-Washer
3-Rear Portion of Flywheel Housing - Inboard (MIE)
4-Drive Plate Screw
5-Washer
6-Typical Early Drive Plate (Later Plate Not Shown)
7-Flywheel Screws
8-Flywheel
9-Set Screw
10 - Thrust Plate / Guide Ring
11 - Guide Ring O-ring
12 - Ring Gear
13 - Turbocharger Screw
14 - Lockwasher
15 - Washer
16 - Turbocharger Bracket
17 - Screw and Washer
18 - Flywheel Housing To Cylinder Block Screw
19 - RPM Speed Sensor
20 - Wave Washer and Allen Head Screw
21 - Starter Stud,Washer and Nut
22 - O-ring for Flywheel Housing
23 - Flywheel Housing
Description
Part Number
A Clean SAE 30W Engine Oil Obtain Locally
B Loctite 271 Thread Locker 92-809819
To Next Page
Loading...
Need help?
General