FUEL INJECTORS
SERVICE MANUAL NUMBER 22
90-860074--1 FEBRUARY 2002 Page 5C-15
8. Using 2 new sealing washers for the hollow bolt, install fuel return pipe line on injection
pump connector. Tighten hollow bolt securely.
73911
75583
a
b
c
Typical
a-Fuel Return Pipe
b-Hollow Bolts
c-Sealing Washers (Two Per Hollow Bolt and Fitting)
9. Refer to Purging Air From Fuel Injectors (Bleeding) to operate the engine and check for
fuel leaks. Repair as needed.
10. Install the engine cover.
To Next Page
Loading...
Need help?
General