TURBOCHARGER
SERVICE MANUAL NUMBER 22
90-860074--1 FEBRUARY 2002 Page 7C-15
8. Remove the two support bracket mounting screws as shown. Remove turbocharger
unit.
70992
a
b
a-Support Bracket
b-Screw With Washer (2)
Disassembly
1. Make matching marks on the exhaust housing and bearing housing to aid alignment in
reassembly.
2. Remove 6 hex nuts or hex screws and the 3 clamping plates shown.
70993
c
b
e
d
a
a-Matching Marks
b-Hex Nuts or Hex Screws (6 Total - 2 Not Shown In This View)
c-Clamping Plates (3 Total - One Not Shown In This View)
d-Exhaust Housing
e-Bearing Housing
To Next Page
Loading...
