Microhard Systems BulletPlus - Page 170

© Microhard Systems Inc. 170
5.0 AT Command Line Interface
AT+MSKA
Command Syntax (Effect: AT&W)
Get/Set ICMP Keep-alive mode.
AT+MSKA=<Mode>
Mode:
0 Disable
1 Enable
Description
Example
Input:
AT+MSKA=1<enter>
Response:
OK
AT+MSWEBUI
Command Syntax (Effect: AT&W)
Get/Set WebUI protocol and port
AT+MSWEBUI[=<Mode>[,<HTTP Port>]
[,<HTTPS Port>]]]
Parameters:
<Mode>: 0 - HTTP/HTTPS
1 - HTTP
2 - HTTPS
<HTTP Port>: 1 to 65535. 80 by default
<HTTPS Port>: 1 to 65535. 443 by default
Usages:
AT+MSWEBUI
AT+MSWEBUI=<Mode>
AT+MSWEBUI=<Mode>,<HTTP Port>
when <Mode>=1
AT+MSWEBUI=<Mode>,<HTTPS Port>
when <Mode>=2
AT+MSWEBUI=<Mode>,<HTTP Port>,<HTTPS
Port> when <Mode>=0
Description
Example
Input:
AT+MSWEBUI=0,80,443<enter>
Response:
OK