Microhard Systems BulletPlus - Page 179

© Microhard Systems Inc. 179
5.0 AT Command Line Interface
AT+MNPORT
Command Syntax (Effect: Immediate)
Get network status.
AT+MNSTATUS?
Description
Example
Input:
AT+MNSTATUS<enter>
Response:
LAN Port Status
General Status
IP Address : 192.168.168.1
Connection Type : static
Subnet Mask : 255.255.255.0
MAC Address : 00:0F:92:02:A8:E4
Traffic Status
Receive bytes : 1.884MB
Receive packets : 18542
Transmit bytes : 2.694MB
Transmit packets : 14377
WAN Port Status
General Status
IP Address : N/A
Connection Type : dhcp
Subnet Mask : N/A
MAC Address : 00:0F:92:03:A8:E4
Traffic Status
Receive bytes : 0B
Receive packets : 0
Transmit bytes : 684B
Transmit packets : 2
4G Port Status
General Status
IP Address : 184.151.220.2
Connection Type : static
Subnet Mask : 255.255.255.255
MAC Address : 00:0F:92:FE:00:01
Traffic Status
Receive bytes : 1.096MB
Receive packets : 8602
Transmit bytes : 10.021MB
Transmit packets : 9461
Default Gateway : 184.0.0.1
DNS Server(s) : 70.28.245.227 184.151.118.254
Kernel IP routing table
Destination Gateway Subnet Mask Flags Metric Ref Use Iface
0.0.0.0 184.0.0.1 0.0.0.0 UG 0 0 0 br-wan2
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br-lan
184.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 br-wan2
192.168.168.0 0.0.0.0 255.255.255.0 U 0 0 0 br-lan