Microhard Systems BulletPlus - Page 180

© Microhard Systems Inc. 180
5.0 AT Command Line Interface
AT+MNDDNSE
Command Syntax (Effect: AT&W)
Get/Set Dynamic DNS (DDNS) mode.
AT+MNDDNSE=<Mode>
Mode:
0 Disable
1 Enable
Description
Example
Input:
AT+MNDDNSE?
Response:
+MNDDNSE: Mode 0
OK
Input:
AT+MNDDNSE=1<enter>
Response:
OK
AT+MNDDNS
Command Syntax (Effect: AT&W)
Get/Set Dynamic DNS (DDNS) settings.
AT+MNDDNS=<service type>,<host>,<user
name>,<password>
service type:
0 changeip
1 dyndns
2 eurodyndns
3 hn
4 noip
5 ods
6 ovh
7 regfish
8 tzo
9 zoneedit
Description
Example
Input:
AT+MNDDNSE?
Response:
+MNDDNSE: Mode 0
OK
Input:
AT+MNDDNSE=4,mydomain.com,user1,password21<enter>
Response:
OK