Microhard Systems BulletPlus - Page 203

© Microhard Systems Inc. 203
5.0 AT Command Line Interface
AT+MWRADIO
Command Syntax (Effect: AT&W)
Get/Set radio status, on or off.
AT+MWRADIO=<Radio>
Radio:
0 - Off
1 - On
Description
Example
Input:
AT+MWRADIO=1 <enter>
Response:
OK
AT+MWMODE
Command Syntax (Effect: AT&W)
Get/Set radio mode.
AT+MWMODE=<Mode>
Mode:
0 - 802.11B ONLY
1 - 802.11BG
2 - 802.11NG - High Throughput on 2.4GHz
Description
Example
Input:
AT+MWMODE=2 <enter>
Response:
OK
AT+MWTXPOWER
Command Syntax (Effect: AT&W)
Get/Set radio TX Power.
AT+MWTXPOWER=<Tx Power>
Tx Power:
0 - 20 dbm
1 - 21 dbm
2 - 22 dbm
3 - 23 dbm
4 - 24 dbm
5 - 25 dbm
6 - 26 dbm
7 - 27 dbm
8 - 28 dbm
9 - 29 dbm
10 - 30 dbm
Description
Example
Input:
AT+MWTXPOWER=10 <enter>
Response:
OK