© Microhard Systems Inc. 207
5.0 AT Command Line Interface
AT+MWFRAGTHRESH
Command Syntax (Effect: AT&W)
Get/Set radio Fragment Threshold.
AT+MWFRAGTHRESH=<Fragmentation
Threshold>
Fragmentation Threshold:
0 Disabled
256-2346 Enabled with the value
Description
Example
Input:
AT+MWFRAGTHRESH=0 <enter>
Response:
OK
AT+MWCCATHRESH
Command Syntax (Effect: AT&W)
Get/Set radio CCA Threshold.
AT+MWCCATHRESH=<CCA Threshold>
CCA Threshold:
Range of values: 4-127
Description
Example
Input:
AT+MWCCATHRESH=28 <enter>
Response:
OK
AT+MWIFACE
Command Syntax (Effect: AT&W)
List/Add/Delete radio virtual interface.
List one or all radio virtual interface(s) :
AT+MWIFACE=0[,<Index>]
Add one radio virtual interface :
AT+MWIFACE=1
Delete one radio virtual interface :
AT+MWIFACE=2,<Index>
Index:
Radio Virtual Interface Index: 0-3
Description
Example
Input:
AT+MWIFACE=0 <enter>
Response:
Radio Virtual Interface [0]:
Network : lan
Mode : ap
TX bitrate : auto
ESSID Broadcast : Off
AP Isolation : Off
SSID : PWii
Encryption Type : psk2
WPA PSK : 1234567890
OK