Microhard Systems BulletPlus - Page 208

© Microhard Systems Inc. 208
5.0 AT Command Line Interface
AT+MWNETWORK
Command Syntax (Effect: AT&W)
Get/Set radio virtual interface: Network
AT+MWNETWORK=[<Index>[,<Network>]]
Index:
Radio Virtual Interface Index: 0-3
Network:
Radio Virtual Interface Network:
0 - LAN
1 - lan1
Description
Example
Input:
AT+MWNETWORK=0 <enter>
Response:
+MWNETWORK: Virtual Interface 0: 0 - LAN
OK
AT+MWSSID
Command Syntax (Effect: AT&W)
Get/Set radio virtual interface: SSID
AT+MWSSID=[<Index>[,<SSID>]]
Index:
Radio Virtual Interface Index: 0-3
SSID:
Radio Virtual Interface SSID: 1 - 63 character
Description
Example
Input:
AT+MWSSID=0,MySSID <enter>
Response:
OK
AT+MWDEVICEMODE
Command Syntax (Effect: AT&W)
Get/Set radio virtual interface: Mode
AT+MWDEVICEMODE=[<Index>[,<Device
Mode>]]
Index:
Radio Virtual Interface Index: 0-3
Device Mode:
Radio Virtual Interface Mode:
0 - Access Point
1 - Client
2 - Repeater
Description
Example
Input:
AT+MWDEVICEMODE=0,0 <enter>
Response:
OK