Microhard Systems BulletPlus - Page 209

© Microhard Systems Inc. 209
5.0 AT Command Line Interface
AT+MWRATE
Command Syntax (Effect: AT&W)
Get/Set radio virtual interface: TX bit rate
AT+MWRATE=[<Index>[,<TX bitrate>]]
Index:
Radio Virtual Interface Index: 0-3
TX bitrate:
Radio Virtual Interface TX bitrate:
0 - auto
1 - mcs-0
2 - mcs-1
3 - mcs-2
4 - mcs-3
5 - mcs-4
6 - mcs-5
7 - mcs-6
8 - mcs-7
9 - mcs-8
10 - mcs-9
11 - mcs-10
12 - mcs-11
13 - mcs-12
14 - mcs-13
15 - mcs-14
16 - mcs-15
Description
Example
Input:
AT+MWTXRATE=0,0 <enter>
Response:
OK
AT+MWWDS
Command Syntax (Effect: AT&W)
Get/Set radio virtual interface: WDS
AT+MWWDS[=<Index>[,<WDS>]]
<Index>
Radio Virtual Interface Index: 0-3
<WDS>
0 - Off
1 - On
Description
Example
Input:
AT+MWWDS=0,1 <enter>
Response:
OK
AT+MWSSIDBCAST
Command Syntax (Effect: AT&W)
Get/Set radio virtual interface: ESSID Broadcast.
AT+MWSSIDBCAST=[<Index>[,<ESSID
Broadcast>]]
Index:
Radio Virtual Interface Index: 0-3
ESSID Broadcast:
Radio Virtual Interface ESSID Broadcast:
0 - Off
1 - On
Description
Example
Input:
AT+MWSSIDBCAST=0,1 <enter>
Response:
OK