Degas Conditions
Degas conditions can be entered as part of a sample file or as a separate file. If
you enter degas conditions as a separate file, you may use the file in as many
sample files as you wish.
Description If you are opening an existing file, this field con-
tains the description.
If this is a new file, enter a description.
Length: 40 alphanumeric characters (at least one
character is required)
Allows you to copy the values of an existing de-
gas conditions file into the file you have open.
When you select this button, an Open File dialog
box is displayed. Select the desired file, then
click . The values are copied into the
new file automatically.
You may edit the values in the new file; the file
from which they were copied remains unchanged.
Conditions Table Enter up to five stages of the following degas con-
ditions.
Replace.
OK
SmartPrep File Menu
Aug 98 3-9
To Next Page
Loading...
