158 Chapter 17: Control Groups
PRO6 Live Audio System
Owner’s Manual
There are 10 VCA groups. Their controls, such as fader, LCD select button etc., are
housed in fast strips at the bottom of the mix bay. POP groups, however, are fewer in
number (six-off). These only have an LCD each, and are housed in a population
groups section just above the VCAs.
The GUI provides full support for the hardware controls. This is in the VCA Groups
screen of the GUI menu, which also includes an unfold button and a solo area B button
for each group. This screen also provides VCA/POP group configuration and
management functions.
Each VCA/POP group can have a combination of channel types as members, although it
is usual to have only either inputs or outputs. Only the input channels are unfolded to
the control surface (in the input bays).
>> To open the VCA Groups screen
At the GUI, choose home
Control GroupsVCA Groups.
To Next Page
Loading...
Need help?
General
