Midas PRO6 User Manual

Master controls, solo/mute and fader 283
PRO6 Live Audio System
Owner’s Manual
Mute, solo and safes
This section contains the MUTE and SOLO buttons, and three safe LEDs (mute safe,
auto safe and fader safe).
1
1
2
1 MUTE button, mutes all post-processing signals
exiting the channel. In addition to scene recall, it can
also be remotely muted from the auto-mute masters.
2 SOLO button, activates signal routing to the
monitor A section of the control centre by sending the
input channel signal to PFL mono and AFL stereo buses.
The solo system is auto-cancelling, so that each new
solo cancels the last one. Input solos override any
active VCA solos.
This button is a latching type. Give a short press to
latch it and a long press to self-connect when it is
released.
3 Solo B button (GUI only), changes the operation of
the SOLO switch so that it routes signals to the monitor
B section of the control centre.
3
2

Midas PRO6 Specifications

General

Brand	Midas
Model	PRO6
Category	Recording Equipment
Language	English