Midas PRO6 User Manual

560 Appendix P: Parameters Copied Through Scenes
XL8 Live Performance System
Owner’s Manual
* Not shown in diagram.
Note: Although band 6 is not shown above, the items in the table also apply. The band
has items 2, 3 and 4, and also includes item 7.
Aux Sends (1 to 16)
Not applicable.
Matrix Sends (1 to 16)
The following diagram shows the parameters of the mix processing area copied through
scenes.
Note: Although only matrix sends 1-2 are referenced above, this also applies to all 16
matrix sends.
7* SHAPE switch Band 6 shelving mode: bell, soft, low pass 6dB or
low pass 12dB
8 C/O switch
Order of processing: Dyn.
JIns.JEQ or
EQ
JIns.JDyn.
Item Control Parameter
1 ON switch Matrix bus send on/off
2 level/pan control
knob
Bus level, or pan when bus is linked
3 PRE switch Pre-fader on/off
4 level control knob Bus level
Item Control Parameter
1
3
1
3
2
1
3
1
3
4
4
4
2
Matrix buses
processing
area in GUI
channel strip

Midas PRO6 Specifications

General

Brand	Midas
Model	PRO6
Category	Recording Equipment
Language	English