MM182-001 – Operator Manual
113
Milestone recommends the following products for cleaning and decontamination of UltraGROSS:
• SUPRASPOR (refer to chapter 5.32)
• 70% alcohol-based reagent
Do not leave any parts that could rust on the Milestone stations. In case of contact, wash
with water and dry immediately.
Always dry the stainless steel surface and do not let it remain in contact with water for long
periods of time.
Rust can be caused by the incorrect storage of the product prior to assembly.
During cleaning operations, rub in the same direction as the satin finish on the steel surface,
as indicated in the following tables.
In case of contact with any of the reagents listed above, wash with water and dry
immediately.
In case of contact with blood, biological fluids, and/or specimens, wash with water and dry
immediately.
If the above indications are not followed, the quality of the stainless steel could be
permanently lost and the warranty offered by the manufacturer could be regarded as null
and void.
Milestone has tested the reagents listed above and will not be held liable if other types of
reagents are used on a long term.
To Next Page
Loading...
