131
Hot water does not damage the Waste disposal unit, but dissolves fats which, depositing in the pipes, cause
future clogging. It is therefore recommended to use cold water.
Connect the Waste disposal unit to a 16 A power socket with earth contact.
Do not use adapters or power strips.
All wiring must be carried out in compliance with current regulations.
Do not store flammable objects such as flammable liquids or spray cans near the Waste disposal unit: The
electric induction motor generates a spark every time it is switched on.
5.10.2. How to install the Waste disposal unit on UltraGROSS
Before proceeding with installation, make sure that there are all the parts:
To Next Page
Loading...
