4-30
4
Move waste ink to a polyethylene tank and return the empty waste ink tank to the
original position.
(1) As indicated in the right figure, move waste ink pooled in the
waste ink tank to another polyethylene tank.
(2) Hold the handle of the waste ink tank and insert it along the
rail.
(3) Raise the waste ink tank.
5
Close the waste ink tank cover.
• When the machine recognizes the waste ink tank, the
warning message is released.
• Request the treatment of waste ink you moved to a
polyethylene tank for an industrial waste disposal
contractor.
• A part of the ingredients (photo polymerization
initiator) has toxicity against aquatic organisms.
Please prevent leakage flow to natural water
systems (river, etc.) and domestic sewages (toilet,
road, etc.)
To Next Page
Loading...
