MIMAKI JFX200-2513 - Turning the Power ON;OFF; Turning the Power on

2-3
1
2
Basic Operations
4
5
6
Turning the Power ON/OFF
Turning the Power ON
1
Push the power button.
• Push the power button located on the left side of the
operation panel.
• The firmware version is displayed when the power is turned ON.
• The machine performs its initial operation.
2
The machine enters LOCAL.
3
Turn ON the power of the connected PC.
• You should normally leave the machine plugged into the power source outlet. Leaving the machine
unplugged can result in clogging of the head nozzle. Depending on the symptoms, it might be difficult
to remedy the fault.
Power button
JFX200 St a r t -up
Ve r 1 . 00
<LOCAL>