MIMAKI JFX200-2513 - Move the Y-Bar

2-18
Printing Data
Move the Y-bar
When you wish to check the printing results etc., you can move the Y-bar.
Set the evacuation position (view position) of the Y-bar in advance.
Setting the view position
1
Press the key in LOCAL.
2
Press the key.
3
Press .
4
Press the key.
5
Set the moving position by pressing the or
keys.
• If you press key, the Y-bar will move to the back of the table
centering the origin.
• If you press key, the Y-bar will move to the front of the table
centering the origin.
6
Press the key.
• The value is set, and the screen returns to Step 2.
Evacuation of Y-bar from the table
1
Press the key in LOCAL.
2
Press the key.
3
Press the key.
• The Y-bar moves.
FUNCT I ON
VIEW [ENT]
VIEW
START [ ENT ]
VIEW
SET VIEW POS [ENT]
SET V I EW POS
= **** mm
SET V I EW POS
=500mm
* * MOV I NG NOW* *
PLEASE WA I T
FUNCT I ON
VIEW [ENT]
VIEW
START <en t >
* * MOV I NG NOW* *
PLEASE WA I T