MIMAKI JFX200-2513 - Registering the Thickness of the Media; Register the Thickness of the Media Manually; Adjust Head Gap with the or Keys

3-4
Registering the thickness of the media
Register the thickness of loading media.
There are three types of registering; “Register the thickness of the media manually”, “Adjust the gap with the
or keys”, and “Measuring the thickness of the media automatically”.
Register the thickness of the media manually
1
Press the key in the local.
2
Press to select the [HEAD HEIGHT].
3
Press the key twice.
4
Press to enter the thickness of loading
media.
• Set value : 0.0 to 50.0mm
5
Press the key.
6
Press the key to end the setting.
Adjust head gap with the or keys
1
Press the or key.
2
Adjust with pressing the or key.
3
Press the key.
FUNCT I ON
VIEW [ENT]
FUNCT I ON
HEAD HE I GHT [ ENT ]
MEDIA THICKNESS
=2.5mm
MEDIA THICKNESS
=10.5mm
FUNCT I ON
HEAD HE I GHT [ ENT ]
OR I G I N SE T UP
ZHEIGHT=45.0
OR I G I N SE T UP
ZHEIGHT=50.0
OR I G I N SE T UP
HEAD GAP = 1 . 2mm
OR I G I N SE T UP
MED I A t = * . * mm