3-20
Setting nozzle face cleaning time
Cleaning of the head nozzle face is performed automatically before printing begins in order to remove any ink
adhering to the nozzle face.
1
Press the key in LOCAL.
2
Press to select [SET UP].
3
Press the key.
4
Press to select [INTERVAL WIPING].
5
Press the key.
6
Press to set intervals.
• Set Value : ON / OFF
• When [OFF] is set, periodical wiping is not executed.
7
Press the key.
8
Press the key several times to end the setting.
To Next Page
Loading...
