Refilling antifreeze mixed water
4-35
1
1
1
4
Routine Maintenance
4
Refill antifreeze liquid.
• Fill the antifreeze liquid from the feed-water inlet.
• Fill the syringe with mixed water and inject while checking
the level indicator. Stop injecting when the red part is
visible.
5
Close the feed-water inlet and the air purge cover, and attach the cover of the left
rear surface of the Y bar.
• Be sure to check the level indicator as you
inject the mixed water. If you fail to check the
indicator and inject too much mixed water, the
mixed water will leak from the tank.
To Next Page
Loading...
