Warning / Error Messages
5-11
1
1
1
1
5
Troubleshooting
Ink Error
Ink error is displayed also in the local guidance. ( P.3-30)
Message Cause Solution
The IC chip of the ink bottle cannot be
read normally.
• Remove the ink bottle generating the
warning once and install it again.
• If the same warning message still appears,
contact your local distributor to call for ser-
vice.
The ink of the ink bottle is different in
type from the ink currently supplied.
• Check the ink type of the ink bottle gener-
ating the warning.
The ink of the ink bottle is different in
color from the ink currently supplied.
• Check the ink color of the ink bottle gener-
ating the warning.
An error occurred in the IC chip infor-
mation of the ink bottle.
• Check the ink bottle generating the warn-
ing.
The ink bottle is not set on the external
ink supply unit.
• Set the ink bottle on the bottle holder with
the warning.
The specified expiration date of an ink
bottle has passed.
The expiration date has passed.
However, you can use it until the end of the
following month.
The expiration date of an ink bottle has
passed (one month has passed after
the specified expiration date).
• One month has passed after the expiration
date.
However, you can use it until the end of
this month. (The ink bottle lamp blinks in
red.)
The expiration date of an ink bottle has
passed (two months have passed after
the specified expiration date).
Two months have passed after the expira-
tion date.
Replace the ink bottle generating the warn-
ing with a new one.
To Next Page
Loading...
