1-10
(2) Tighten the specialized cap using the tightening jig.
(3) Turn the bottle upside-down and check that ink does not
leak.
4
Set the ink bottle on the tank.
• Set the ink bottle while moving the lever on the tank
completely to the right.
• Do not leave an ink bottle with the specialized cap attached in a location where it is
exposed to light for a long period of time. Doing so can result in the ink in the bottle curing
(hardening).
• Do not ever rotate the ink bottle at all after
setting it into the tank.
Doing so can result in ink leakage.
Align the with the
tightening jig.
Tightening jig
• Tighten until the arrows on the tightening jig are aligned.
• Do not tighten the dedicated cap too much. Doing so may damage it.
To Next Page
Loading...
