Mindray Passport V Operating Instructions

Passport V Operating Instructions 0070- 0-0704-02 2 - 3
System Configuration Installation Menu
Notch Filter 50 Hz
60 Hz
Off
60 Hz Select to change notch filter
for ECG.
ESU Filter Auto
Disable
Auto Select to change the ESU
filter.
SpO
2
Sensor Off
Audio
Off
Once
Repeat
Off Select to change the SpO
2
Sensor Off Audio alert
type.
SpO
2
Tones Standard Tones
Alternate Tones
Standard Tones Select to change the SpO
2
tones.
Enable Arrhythmia All
Off Selection
Yes
No
No Select to enable or disable
the Arrhythmia All Off
menu selection.
Apnea Latch On
Off
On Select to turn apnea alarm
latching on or off.
Enable Silence All
Permanent Selection
Yes
No
No Select to enable or disable
the Permanent Audio Off
menu selection.
Auxiliary Output Nurse call
Analog Output
Defib Sync
Nurse Call Select to change the
function of the Auxiliary
Output interface.
Nurse Call Mode Normally Open
Normally Close
Normally Open Select to change the type
of Nurse Call system
Set up Serial Port 1 None
DIAP
Gas Module
None Select to set up comm port.
Set up Serial Port 2 None
DIAP
Gas Module
None Select to set up comm port.
Copy Monitor Defaults
to Storage Device
Select to copy monitor
defaults to Storage Device.
Copy Monitor Defaults
from Storage Device
Select to copy monitor
defaults from Storage
Device.
Re-boot in demo mode No
Yes
No Set to “YES” to start the
monitor in demonstration
mode on next power-up.
Normal monitoring will
resume after cycling power
in demonstration mode.
Restore factory
defaults
Select to restore factory
defaults
Advanced Installation
Setup
Select to access Advanced
Installation Setup Menu.
Change Password Select to change
password.
Options Select to add/view
options.
MENU TITLE
ON SCREEN MENU CHOICES DEFAULT COMMENTS
0

Mindray Passport V Specifications

General

Brand	Mindray
Model	Passport V
Category	Health Care Products
Language	English