Mindray Resona R9 Exp User Manual

7 - 22 Operator’s Manual
7 3D/4D
4. The system finishes acquisition and enters the image viewing screen.
In image review status, you can perform operations such as VOI setting, image editing,
comment adding, body mark adding, etc.
5. Or press <B> or toggle to exit the mode.
Operation Controls
Adjustable parameters for iLive are on the [Adv.] tab.
• Shading
Adjusts the effect of shadowing and scattering. When the selected level is 0, the rendered
image will be bright and sharp, and the shadow border will be clear while the area of the
shadow will be relatively small. As the level increases, the rendered image will become
warmer but the details remain the same. Also, the shadow border will be smoother while the
shadow area will be large.
• Light source adjustment
You can make fine adjustments by tapping [Move Light] and rolling the trackball to adjust.
•Grad View
After this function is activated, VR details will be revealed and enhanced.
Other operation controls and adjusting methods are similar to those in 3D/4D mode.
Lighting Mode
1. Tap on the [iLive] item to enter the iLive settings interface.
2. Tap the desired lighting mode.
If necessary, adjust parameters for the selected lighting mode.
3. Tap [Return] to apply the selected lighting mode.
Operation Controls for Lighting Mode Settings
Parameter Description
VL Sat. Adjust the saturation for light 1/2/3.
VL Hue Adjust the color for light 1/2/3.
VL Dis. Adjust the distance for light 1/2/3 when the light source is set to torch
or point.
The larger the distance, the more the illuminated part on the
surrounding area of the image; vice versa.
VL Angle Adjust the angle for light 1/2/3 when the light source is set to torch.
The larger the angle, the larger the scope of light beam, and the larger
the illuminated area; vice versa.
Copy to Copy the lighting mode to customized lighting mode “User 1” or
“User 2”.
Reset Classic/ IntPoint/
ExtPoint/ Parallel/ Torch/
3-Light/ User 1/ User 2
Reset the lighting mode to the original status.
Rotation Roll the trackball to view sectional images as necessary. Rotate <M>,
<PW>, <C> to perform axial rotation or rotate the <4D> knob to
adjust the nearest VOI section (cut plane) position.

Mindray Resona R9 Exp Specifications

General

Brand	Mindray
Model	Resona R9 Exp
Category	Diagnostic Equipment
Language	English