Mindray Resona R9 Exp User Manual

4 Setup
Operator’s Manual 4 - 27
– Change the template used in the report layout: click [New Layout] to select another
template.
– Double click the information lines to be edited in “Report body”. The dialog box of font
setting appears. Set the font size, font weight or hidden key words.
– Double click the blank of a module in “Report Body”. The dialog box of editing the
content appears. Select the content to be displayed at current position.
– Press left <Set> on the blank of a module in “Report Body”. Choose to add or delete the
line, or add the table, etc.
8. Click [Save] to save the setting.
9. Click [Close] to quit the template.
Deleting Report Templates
Perform the following procedure:
1. Select the [Report] on the [Measure] page.
2. Select the template to be deleted from the list.
3. Click [Delete] > [Yes] to delete the selected template.
4. Click [Save] to confirm the settings.
Editing Report Templates
Perform the following procedure:
1. Select the [Report] on the [Measure] page.
2. Select the template to be modified from the list.
3. Select [Edit] to enter the report editing page.
4. Click [Save] to confirm the settings.
Setting Default Templates
Perform the following procedure:
1. Select the [Report] on the [Measure] page.
2. Select a report template from the list.
3. Click [Default].
4. Click [Save] to confirm.
Editing Anatomy Information
Anatomy information items can be added or deleted from the Report page.
Perform the following procedure:
1. Select the [Report] on the [Measure] page.
2. Select a report template from the list.
3. Click [AnatomyInfo].
4. Click the drop-down list besides “Application Region” to select the application.
5. Use the [>], [>>], [<] and [<<] buttons to add or delete items.
You can click [New] to add user-defined items.
6. Click [OK] to confirm.

Mindray Resona R9 Exp Specifications

General

Brand	Mindray
Model	Resona R9 Exp
Category	Diagnostic Equipment
Language	English