Saving Settings in Weighing Mode
You can specify the save type used in the Application Parameters
Setup menu.
By default, all application parameters saved (e. g., reference values) remain in
memory and are available when
– the device has been switched o and then on again
– you return to the originally selected application from a second one (e. g., when
you switch from Averaging back to Counting all parameters saved for Counting
are available).
Applying the Tare Weight
To save the weight on the weighing platform as a tare weight:
t Place the tare object on the weighing platform.
t Press ).
y The value is applied as the tare value.
Input Through the Digital Control Port
You can connect a remote hand switch or foot switch to the input control
line, for use with all application programs. The following functions can be
assigned in the Setup menu Device Parameters:Control I/O
Ports:Universal Switch Key:
– Off – Zeroing key
– Print key – On key
– Print key >2 sec – CF key
– Tare key – F1 function key
– ISO test key – Appl. toggle key
– Fn key function – 10x higher resolution key
– WP toggle key – Net/gross value key
– Combined zero/
tare function
Operating Instructions Combics Complete Scales 55
Operating Design
To Next Page
Loading...
Need help?
General
