Minebea Intec CAS-SPC Series - Barcode Scanner Usage in Operation; Weighing with Barcode Scanner

Main scale: rst platform displayed on start-up
You can select the weighing platform to be displayed rst when the device is turned
on in the Setup menu:
“Device parameters:Operating parameters:Main
scale:oWP 1
“
Press n to toggle the readout between platforms.
Using a barcode scanner to enter tare weight
The tare weight of the container can be entered via a barcode scanner.
Operating Menu Setting: “Device parameters:Bar code:oTare-value“
The value is applied and saved automatically. The content of the tare memory can
be displayed in Info mode by pressing the D key.
Using a barcode scanner to enter application parameters
Application parameters (reference value) can be entered via a barcode scanner.
Operating Menu Setting: “Device parameters:Bar code:oReference-value“
The value is applied and saved automatically.
Using a barcode scanner to enter an identier
Identiers can be entered via a barcode scanner.
Operating Menu Setting: “Device parameters:Bar code:oID“
The value is applied and saved automatically.
Scanning barcodes directly
You can directly scan a barcode using the barcode scanner.
Operating Menu Setting: “Device parameters:Bar code:oInput“
The barcode can contain the following codes:
– “I“ for write identier
– “T“ for save tare memory
– “R“ for write reference weight
– “A“ for activate product data memory
Examples: “I4Anton“ = write the character string to ID 4: Anton
“TC1“ = write 1 Kg to the preset tare memory.
“C“ = unit: Kilograms
“B“ = grams
“D“ = carat,
etc.
“RC0.0023“ = write 0.0023 kg as the reference weight
“A1“ = load product data memory 1
78 Operating Instructions Combics Complete Scales
Operation